mordashka
Magnetics Epcos (Siemens Matsushita Components), Germany TDK Ferroxcube
North West Laboratory

Engineering Center SZL and LEPCOS
— General representative of Epcos AG by ferrite in the CIS
— Official distributor and general representative for ferrites of
    TDK Electronics Europe Gmbh in the CIS
— Authorized distributor of Magnetics in Russia, CIS and Baltic countries
— Exclusive distributor of USM in Russia and CIS countries
— Official Distributor Temex Ceramics in Russia and CIS
 
Products » EMC Cores » CF Series »

CF Series Ferrite Cores

CF SeriesCF series ferrite cores are intended to be set up on round cable to suppress high-frequency noises. CF series core consists of two halves of ferrite mounted within plastic casing whose two parts are fixed by latch. Core’s construction provides simplicity of assembly and disassembly on cable to be protected.

CF series cores may be successfully used in different power and signaling applications in input and output circuits of household and industrial electronics – for example, of pulse power supplies, monitors, fax machines, TV sets. In applications requiring large values of impedance, necessary values may be obtained by passing several turns of cable through CF core.

CF Cores

Order code A
(mm)
B
(mm)
C
(mm)
D
(mm)
Typical Impedance (Ohms) Fig.
50MHz 100MHz 200MHz
CF-65S 17.8 19.5 6.5 32.5 230 270 285 1
CF-65SL 17.8 19.5 6.5 32.5 135 245 430 1
CF-100S 22.3 23.3 10.0 32.6 155 195 250 2
CF-100SL 22.3 23.3 10.0 32.6 125 220 390 2
CF-130S 29.6 30.5 13.0 33.0 190 230 250 3
CF-130SL 29.6 30.5 13.0 33.0 140 235 410 3

CF Cores

Order code A
(mm)
B
(mm)
C
(mm)
D
(mm)
Typical Impedance (Ohms) Fig.
50MHz 100MHz 200MHz
CF-35R 12.8 14.7 4.0 25.0 110 145 205 4
CF-50R 14.5 15.7 5.6 29.0 115 155 215 5

CF Cores

Order code A
(mm)
B
(mm)
C
(mm)
D
(mm)
Typical Impedance (Ohms) Fig.
50MHz 100MHz 200MHz
CF-35M 11.7 13.0 3.5 25.0 165 190 235 4
CF-50M 11.7 13.0 5.0 25.0 125 155 200 5
CF-50MW 11.7 13.0 5.0 25.0 100 145 225 5
CF-70M 14.8 17.0 7.0 30.0 95 120 175 6
CF-90M 18.0 19.7 9.0 35.0 145 170 220 7
CF-90MW 18.0 19.7 9.0 35.0 130 175 240 7

CF Cores

Order code A
(mm)
B
(mm)
D
(mm)
L
(mm)
Typical Impedance (Ohms) Fig.
50MHz 100MHz 200MHz
CF-70A 14.2 7.3 17.6 22.0 70 90 150 6
CF-90A 18.6 9.0 31.0 35.2 145 170 220 7
CF-90AW 18.6 9.0 31.0 35.2 130 175 240 7
CF-110A 20.0 11.0 32.0 36.2 80 105 160 8
CF-130A 29.5 13.0 34.0 39.2 145 180 220 3

CF Cores

Order code A
(mm)
C
(mm)
D
(mm)
L
(mm)
Typical Impedance (Ohms) Fig.
50MHz 100MHz 200MHz
CF-80U1 21.5 8.15 16.8 23.0 65 95 160 9
CF-80U2 21.5 8.15 19.7 25.8 75 105 170 9
CF-115U 30.3 11.4 17.7 23.9 70 100 165 8
CF-150U 31.5 15.0 15.2 21.5 65 90 165 8

Impedance vs Frequency Dependency

Impedance vs frequency dependency for CF series ferrite cores:

Impedance vs frequency dependency for CF series ferrite cores

Table data and impedance-frequency dependency graphs shown above are measured in wire section having a diameter of 1 mm and a length of 10 cm and passing through corresponding core of CF series. In practical applications of using other cables, real frequency dependencies may differ from specified above.

 
NORTH-WESTERN LABORATORY: NEWS
 
09.10 19 

LEPCOS invites you to attend the Stand C23 at ChipEXPO 2019 exhibition, which will be held from 16 to 18 October 2019 in Moscow in the Expocentre, in the pavilion "Forum".

chip_expo



26.06 19 
According to the results of 2018 Lepcos has received "best ferrites seller 2018" seal of excellence from TDK company.



18.04 19 
Dear colleagues! We would like to draw your attention to the fact that, since December 2018, the package content of electrolytic capacitors has been changed.



 
 


«North West Laboratory» © 1999—2019

Development & support — Marina Kutuzova